Product Description
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. the new ceramic dust cap is very light weight and rigid, keeping distortion an absolute minimum. The new, enlarged motor structure ensures better overall woofer control for a clean, strong bass response.
Alpine S-W10D2 S-Series 10" Subwoofer With Dual 2-ohm Voice Coils
Great bass in less space
To create great bass, you need the best in materials and engineering. Alpine's S-Series subwoofers apply technology from their higher end subs to bring you the depth and punch that'll make your tunes come alive. And to make things even better, these subs are about an inch shallower than their predecessors, making them great candidates for locations where regular high-power subs won't fit.
Advanced materials
The S-W10D2 10" sub can handle up to 600 watts RMS, so you can drive it hard without any worries. The tough Kevlar® treated cone stays rigid under pressure, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Its dual 2-ohm voice coils allow for extra wiring flexibility, which helps if you plan on adding another subwoofer down the line. Also, it rocks in both sealed and ported boxes, so you can choose an enclosure that suits your tastes.
Product highlights:
● 10" subwoofer with dual 2-ohm voice coils
● Kevlar reinforced pulp cone with HAMR Santoprene rubber surround
● frequency response: 28-200 Hz
● power handling: 600 watts RMS (300 watts per coil)
● peak power handling: 1,800 watts
● sensitivity: 85.3 dB
● top-mount depth: 4-11/16"
● grille not included
Features
● Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers
● Polypropylene/Ceramic Composite Dust Cap
● Kevlar Reinforced Pulp Cone High-Performance subwoofers
● Twist-Lock Grille Mount System
● High-Amplitude Multi-Roll (H.A.M.R.) Surround
● Large Double-Stacked Magnets
What's in the Box
● 10” R2-Series DVC Subwoofer with Cosmetic Trim Ring
● 2 Jumper Wires for DVC Configuration
● Owner’s Manual
Specifications
● 750W RMS
● 2250W Peak Power Handling
● Frequency Response: 26Hz-200Hz
● Sensitivity (1W/1m): 82.4dB
● Nominal Impedance: 2Ω + 2Ω
● Voice Coil: 65mm
● X-Max: 20mm
● Magnet Weight: 123oz
● Mounting Depth: 6” (152mm)
● Cutout Size: 9-1/16” (231mm)
● Push-Type Speaker Terminals (Up to 8AWG Wire Size)
● CTA-2031 Compliant
