null

Infinity Kappa Two 2-channel car amplifier — 100 watts RMS x 2

RM2,599.00
(0) Write a Review
SKU:
Infinity Kappa Two

Product Description

About the Infinity Kappa Two

Buck Pomerantz

Delivers power in style

This handsome little black box delivers big power and fits almost anywhere in your car. Infinity's Kappa Two 2-channel amplifier can supply a pair of high-performance speakers with 100 watts RMS each — good news for everyone who likes it loud and clean. You could also use this amp bridged in one-channel mode to power a subwoofer with up to 240 watts RMS. The variable high- and low-pass filter optimizes the amp's output for your speakers or subs, increasing the efficiency of the system.

Good connections

You can use this amp's preamp outputs to connect to a subwoofer amp, like the matching Infinity Kappa One 6 or Kappa One K, so your system will have plenty of low-end punch — a remote output connection on this amp will even turn on your sub amp. The Kappa Two can accept low- or speaker-level inputs so it'll work in almost any system — and Infinity includes RCA-to-speaker wire adapters so you'll make the right connections. They also include an electrical anti-rotational locking (E.A.R.L.) ground terminal, which provides a very secure and conductive ground connection for the amplifier.

Infinity Kappa 2

Kappa 2 signal connections and controls

 

Product highlights:

  • 2-channel car amplifier
    • 100 watts RMS x 2 at 4 ohms
    • 120 watts RMS x 2 at 2 ohms
    • 240 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode)
  • Class D amp technology
  • frequency response: 15-35,000 Hz
  • variable high- or low-pass filter (32-320 Hz, 12 dB/octave)
  • preamp inputs and outputs
Other Features:
  • speaker-level inputs (speaker wire-to-RCA adapters included)
  • E.A.R.L. ground terminal included
  • wiring and hardware not included with amplifier
    • 8-gauge power and ground leads recommended
  • fuse rating: 30A x 1
  • dimensions: 8-7/8"W x 1-3/4"H x 8-1/4"D

 

What's in the box:

  • 2-Channel amplifier
  • Two 30-amp ATO fuses (1 installed)
  • 2 Speaker wire-to-RCA adapters
  • EARL ground terminal (for 4-gauge wire)
  • Three 1/2" Self tapping screws
  • Heat shrink (1-3/16" long)
  • Four 2" Screws
  • 2-pin Remote input (Phoenix) plug
  • Owner's manual (English/ French/ Spanish/ Portuguese/ Korean/ Chinese/ Indonesian)